A lawn irrigation system is a combination of dozens of elements. Thanks to her, our lawn always sparkles with freshness, pleases the eye and fills the air with oxygen. And it saves us from having to waste time manually watering the lawn. Let's take a closer look at everything for watering the lawn - what components and in what quantity will be needed. So, among the main elements of the irrigation system:- sprinklers;- solenoid valves;- fittings;- filters;- pipeline;- pumping station (or pump);- storage capacity;- controller;- weather sensors. Sprinklers are devices for spraying water. Sprinklers are usually divided into 2 types: static and rotary. Static (or in another way, sprays) spray liquid onto a specific sector without rotation, but rotors have a special rotating part that helps spray water onto a circle of a certain radius. Electromagnetic valves are used to open or close water access to certain areas of the lawn. The valves can be of different diameters, depending on how much water flow is needed and for which area. Fittings are connecting elements that are necessary for turns, branching and transitions between different parts of the pipeline. They are also necessary if you often have to assemble or disassemble the irrigation system. Filters purify water from impurities and other debris, extending the service life of the system. The pipeline is actually the main component, everything for watering the lawn is simply unthinkable without it. In this case, the pipeline is a system of pipes through which water is supplied from its source to the lawn grass. A pumping station (or pump, it all depends on the size of the irrigation site) is necessary to raise water from the depths to the surface. If a centralized water supply is connected to the site, this greatly simplifies the matter and the need for a pump may disappear. But if you want to have your own water source and not depend on anyone, drilling a well and then installing a pump will easily solve this issue. The storage tank is usually made of plastic and is installed if it is necessary to use more water per irrigation than the water supply system can provide. The controller is the main computer that allows you to automate the irrigation system. It is enough to set the irrigation program for it, and irrigation will be carried out on specified days to a specified area. Weather sensors detect changes in the environment and transmit this information to the controller, which in turn adjusts the irrigation program depending on the changes “overboard”. We tried to consider everything for watering the lawn, excluding auxiliary and additional elements. We hope this information will help you turn your lawn into a fragrant lawn! برومو كود 1xbet للرهان المجاني